รายละเอียดบทความ

Sport

2010 BMW Motorcycles

2010 BMW S1000RR

Image Hosted by ImageShack.us

2010 BMW S1000RR

Image Hosted by ImageShack.us

2010 BMW S1000RR

Image Hosted by ImageShack.us

2010 BMW S1000RR

Image Hosted by ImageShack.us

2010 BMW S1000RR

Image Hosted by ImageShack.us

2010 BMW S1000RR

2010 BMW S1000RR - USA Specifications

Engine
Type Water-cooled 4-stroke in-line four-cylinder-engine, two camshafts, four valves per cylinder
Bore x stroke 80 mm x 49.7 mm
Capacity 999 cc
Rated output 142 kW (193 hp) at 13,000 rpm
Max. torque 112 Nm at 9,750 rpm
Compression ratio 13.0 : 1
Mixture control / engine management Electronic intake pipe injection/digital engine management including knock sensor (BMS-K-P)
Emission control Catalytic- 2 Closed-loop 3-way catalytic converter, emission standard EU-4 ready

Performance / fuel consumption
Maximum speed Over 200 km/h
Fuel consumption per 100 km at constant 90 km/h 5.7 l
Fuel consumption per 100 km at constant 120 km/h 5.9 l
Fuel type Unleaded premium, octane number 95-98 (RON), automatic knock control
Electrical system
Alternator three-phase alternator 350 W
Battery 14 V / 10 Ah, maintenance-free
Power transmission


Clutch Multiple-disc clutch in oil bath, anti hopping clutch, cable operated
Gearbox Constant mesh 6-speed gearbox
Drive chain

Chassis / brakes
Frame Bridge-type frame, cast aluminium, load-bearing engine
Front wheel location / suspension 46 mm Upside-down fork, rebound and compression adjustable
Rear wheel location / suspension Cast aluminium swing arm, Continuously adjustable rear inbound-rebound damping, high and low speed
Suspension travel front / rear 120 mm / 130 mm
Wheelbase 1,432 mm
Castor 95.9 mm
Steering head angle 66,1 °
Wheels Cast aluminium
Rim, front 3.50 x 17"
Rim, rear 6.00 x 17"
Tyres, front 120/70 ZR 17
Tyres, rear 190/55 ZR 17
Brake, front Twin disc, floating brake discs,radial-fixed 4-piston calipers, diameter 320 mm, 5 mm thickness
Brake, rear Single disc brake, one-piston floating caliper, diameter 220 mm, 5 mm thickness
ABS DTC**: DTC 4 mode dynamic traction control adjustment, only avalibale with Race ABS, disengageable
Race-ABS*: 4 mode Race-ABS adjustment, disengageable

Dimensions / weights
Length 2,056 mm
Width (incl. mirrors) 826 mm
Height (excl. mirrors) 1,138 mm
Seat height, unladen weight 820 mm
Inner leg curve, unladen weight 1,810 mm
Unladen weight, road ready, fully fuelled 1) 204 kg (206.5 kg incl. Race-ABS)
Dry weight 2) 183 kg
Permitted total weight 390 kg
Payload (with standard equipment) 187 kg
Usable tank volume 17.5 l
Reserve approx. 4.0 l

1) According to guideline 93/93/EWG with all fluids, fuelled with at least 90% of usable tank volume
2) Unladen weight without fluids

....................................................................................................................................................... 

2010 BMW K1300S

Image Hosted by ImageShack.us

2010 BMW K1300S

Image Hosted by ImageShack.us

2010 BMW K1300S

Image Hosted by ImageShack.us

2010 BMW K1300S

Image Hosted by ImageShack.us

2010 BMW K1300S

Image Hosted by ImageShack.us

2010 BMW K1300S

Image Hosted by ImageShack.us

2010 BMW K1300S

2010 BMW K1300S - USA Specifications

Engine

Type Water-cooled 4-stroke in-line four-cylinder-engine, four valves per cylinder, two overhead camshafts, dry sump lubrication

Bore x stroke 80 mm x 64.3 mm

Capacity 1293 cc

Rated output 175hp (129 kW) at 9,250 rpm

Max. torque 103 lb/ft (140 Nm) at 8,250 rpm

Compression ratio 13,0 : 1

Mixture control / engine management Electronic intake pipe injection/digital engine management including knock sensor (BMS-K)

Emission control Closed-loop 3-way catalytic converter, emission standard EU-3

Performance / fuel consumption

Maximum speed Over 125mph 200 km/h

Fuel consumption per 100 km at constant 90 km/h 4,7 l

Fuel consumption per 100 km at constant 120 km/h 5,3 l

Fuel type Unleaded Premium

Electrical system

Alternator three-phase alternator 580 W

Battery 12 V / 14 Ah, maintenance-free

Power transmission

Clutch Multiple-disc clutch in oil bath, hydraulically operated

Gearbox Constant mesh 6-speed gearbox

Drive Shaft drive


Chassis / brakes

Frame Bridge-type frame, cast aluminium, load-bearing engine

Front wheel location / suspension BMW Motorrad Duolever; central spring strut

Rear wheel location / suspension Cast aluminium single-sided swing arm with BMW Motorrad Paralever; central spring strut with lever system, spring pre-load adjustable hydraulically (continuously variable) at handwheel, adjustable rebound damping

Suspension travel front / rear 4.5 inches (115 mm) / 5.3 inches (135 mm)

Wheelbase 62.4 inches (1585 mm)

Castor 4.1 inches (104.4 mm)

Steering head angle 60.4°

Wheels Cast aluminium

Rim, front 3,50 x 17"

Rim, rear 6,00 x 17"

Tyres, front 120/70 ZR 17

Tyres, rear 190/55 ZR 17

Brake, front Twin disc, floating brake discs, diameter 320 mm, 4-piston fixed calipers

Brake, rear Single disc brake, diameter 265 mm, double-piston floating caliper

ABS Standard equipment: BMW Motorrad Integral ABS (part-integral)

 

Dimensions / weights

Length 86 inches (2182 mm)

Width (incl. mirrors) 35.6 inches (905 mm)

Height (excl. mirrors) 48 inches (1221 mm)

Seat height, unladen weight 32.3 inches (820 mm) (low seat: 31.1 inches [790 mm])

Inner leg curve, unladen weight 71.2 inches (1810 mm) (low seat: 68.9 inches [1750 mm])

Unladen weight, road ready, fully fuelled 1) 560 lbs (254 kg)

Dry weight 2) 503 lbs (228 kg)

Permitted total weight 1014 lbs (460 kg)

Payload (with standard equipment) 454 lbs (206 kg)

Usable tank volume 5 U.S. gallons (19 litres)

Reserve approx. 1 U.S. gallon (4.0 litres)

Technical data relate to the unladen weight (DIN)

เครดิตเว็บเพื่อนบ้าน.....................................

ผู้ลงบทความ : Admin